Features
Equiped with Japanese Mitsubishi PLC & temperature controller, Schneider contactor, Delta or ABB invertor, Siemens Motor, HITECH oil pump, Original Japan MOOG 100 points parison controller.
Oil pump motor adopt latest servo motor, saving more than 40% energy consumpion.
Optional function for special blow molding such as : Bottom blowing, Side blowing, vaterial support, inner and outer screw mould release, sub-mould open and close, automatic sealing, mechanical robot so on.
Technical Parameter
| Name | Units | ABLD 100 | ABLD 110 |
| Max. product volume | L | 120 | 160 |
| Dry cycle | PC/H | 360 | 300 |
| Screw diameter | MM | 100 | 110 |
| Screw L/D ratio | VD | 28 | 28 |
| Screw drive power | KW | 55 | 75 |
| Screw heating capacity | KW | 22 | 25 |
| No. of heating zone | ZONE | 5 | 5 |
| Output of HDPE | KGVH | 200 | 240 |
| Oil pump drive power | KW | 22 | 30 |
| Clamping force | KN | 600 | 900 |
| Max. size of mold | MM | 1000×1400 | 1150×1700 |
| Material storage | L | 14 | 22 |
| Template size | MM | 1150×1150 | 1150×1600 |
| Mold stroke | MM | 550-1350 | 550-1350 |
| Max. die diameter | MM | 450 | 650 |
| Die heating power | KW | 21 | 25 |
| Die heating few segments | ZONE | 5 | 5 |
| Blowing pressure | MPA | 0.8 | 0.8 |
| Air volume | M³/MIN | 1.6 | 1.6 |
| Cooling water pressure | MPA | 0.3 | 0.3 |
| Water consumption | L/MIN | 150 | 150 |
| Size of machine | LxWxH | 5.4×2.5×4.5 | 5.8×3.2×4.8 |
| Weight of machine | TON | 15 | 20 |
Details and Construction
We supply a full range of extrusion blow molding machines globally, from economical single-cavity equipment to efficient multi-cavity production lines, suitable for different production paces such as small-batch trial production and large-scale mass production. As a comprehensive solution provider, we focus on customer cost control needs, offering a full-chain lean solution from raw material loss optimization, energy consumption reduction, to production process streamlining. Through intelligent parameter matching and precise mold design, we help customers achieve a 15%-20% reduction in unit product cost. Our products are exported to over 60 countries worldwide. Whether you are a start-up or an industry leader, you can obtain a tailored production configuration with optimal cost, coupled with global spare parts supply and technical support, allowing for continuous expansion of profit margins.
English 
Arabic 
Spanish 
